Micro Touch pioneered the use of microprocessor controls to regulate water injection on exhaust systems. RIVA asked us to build them a custom Water Controller and is designed to work in conjunction with their products.
Wire Colors: • Red with Fuse to 12v (+) on Battery or Tether Cord Ignition Power • Black Wire to Ground (-) on Battery or suitable Ground • Gray Wire - Senses Engine RPM from OEM Digital Tach Wire or MSD • Brown Wire - Digital Tach Output Wire • Green Wires - Water Injection Solenoid #1 • Blue Wires - Water Injection Solenoid #2
Note Keep Watercontroller a few inches away from ignition coil or plug wires. Remember to keep Dielectric Grease on the fuse and jumper pins at ALL TIMES!!! Wrap electrical tape around Watercontroller and pins after settings are made and grease is installed!
