|
MT-WS-2 (3) Water Controller
|
|
|
Micro Touch pioneered the use of microprocessor controls to regulate water injection on exhaust systems. This controller was designed to meet the needs of tuners that already have one of our water injection controllers and want to expand their system to include injection into the waterbox or stinger(s). The unit installs easily and senses engine RPM with an inductive pickup wire that wraps around a spark plug wire. Choose from 16 different RPM settings for "Water On". Works great with many exhaust systems to find "hidden" power. This unit is available in 2 or 3 cylinder versions.
|
|
|
|
Wire Colors:
• Red with Fuse to 12v (+) on Battery or Tether Cord Ignition Power
• Black Wire to Ground (-) on Battery or suitable Ground
• Yellow Wire - Senses Engine RPM from Spark Plug Wires
Wrap around Each Plug Wire 3 Turns around - Then Tape!
• Gray Wire with Red - Black Wires - Water Injection Solenoid
|
|
|
Note
Keep Watercontroller a few inches away from ignition coil or plug wires.
Remember to keep Dielectric Grease on the fuse and jumper pins at ALL TIMES!!!
Wrap electrical tape around Watercontroller and pins after settings are made and grease is installed!
|
|
|
MT-WS-2 (2 Cylinder Version)
|
$125.00
|
|
MT-WS-3 (3 Cylinder Version)
|
$125.00
|
