|
The Micro Touch MT-ECFP Controller is available in 2 or 3 cylinder versions. It is commonly used for turning a fuel pump on at one of its preset RPM’s
2,000 rpm
3,000 rpm
4,000 rpm
5,000 rpm
and stays on until the RPM slows lower than the setting. The idea is to keep a constant 4-5 lbs. of fuel pressure at the carburator. It turns off at lower RPMs to keep the engine from flooding. It is a simple hook-up. It works off of the stock tach or if you use a MSD ignition you can connect it to their tach output (Gray) wire.
|
